Products

Sequenced Output Power Management

PWR-DA09C/IP

product

The ABtUS PWR-DA09C/IP is a safe and convenient Sequenced Output Power Management distribution unit off ering protection to all valuable rack-mounted equipments. Sequenced power up of a complete power audio system from just a push of a switch that eliminates the loud “POP” sound which may damage speakers and other equipments connected.

The PWR-DA09C/IP features sequenced power start up. During start up, each outlet is turned on one at a time with a delay time (available and programmable) between each other.

This delay prevents the “POP” sound by allowing each piece of equipment to properly power up before allowing the audio signals to pass through. The PWR-DA09C/IP also features current, voltage and temperature monitoring/alarm. It is able to power ON/OFF each individual port through its user friendly user interface, RS-232 command, IP network and etc.

• 8 power delay outlets
• Current, voltage and temperature monitoring
• Customizable delays between power cycles
• Individual outlet control for each power outlet
• Multi-Stage surge protection
• Controllable via IP
• Allow monitoring of voltage, current, power factor and frequency
• Able to cut supplied power active, voltage and temperature when the temperature exceed the preset limit
• 8 switched outlets (rear) and one pass through un-switched outlet (front)

Max load : 16 AMP
Input voltage : 100 to 240 VAC
Power Outlets : 8
Control Ports : 1 x RS232 and 1 x RJ45 Ethernet port
Real time monitoring : Yes
Spike protection modes : Line to neutral, zero ground leakage
Spike clamping voltage : 188 Vpk @ 3,000 amps, (133 VAC RMS)
Response time : 1 nanosecond
Maximum surge current : 6,500 amps
Operating temperature : 0°C - 50°C
Storage temperature : -29°C -60°C
Humidity   10-90% RH
Housing : Metal Housing
Fixedness : Standard 1-U rack mount (*with “L” bracket)
Dimension (W*H*D) : 430 × 240 × 45 m
Weight : 3.6 kg