Products

1:1 HDMI over Single CAT-5 Extender Transmitter

CAT-HDX11T/AP2

The ABtUS CAT-HDX11T/AP2 (Transmitter) HDMI Tree Extender allows Full HD signals to be extended over a longer distance and larger number of displays. It can extends Full HD video, Multi channel audio, IR and RS-232 over single CAT-5 cable over 100m.

With the use of transceivers, the signal can be repeated and extended over another 100m (each level). The number of displays could also be increased with the number of transceivers used in the setup.

Ideal for any long distance signal transmission with multiple displays showing the same image.

  • Full HD 1080p video over Single CAT-5/6/7
  • Multi Channel Audio, IR and RS-232 over Single CAT-5/6/7
  • 100m each level
  • Recommended extension of up to 31 displays over 500m
    CAT-HDX11T/AP2 CAT-HDX112R/AP2
INPUT : 1 × HDMI (*19pin female) 1 × HDMI
1 × IR
OUTPUT : 1 × RJ45
1 × IR
2 × RJ45
1 × HDMI (*19 pin female)
CONTROL PORT : 1 × RS-232 (*3 pin Terminal block) 1 × RS-232
HDMI COMPLIANCE : 1080p 60Hz 1.3
VGA BANDWIDTH :

Yes

VGA BANDWIDTH : Single-link 225 MHz (6.75 Gps)
MAX VIDEO SUPPORT : 1080p @ 60Hz 36-bit color
AUDIO SUPPORT : 1280 × 1024
CAT-5 CABLE LENGTH : Surround Sound (up to 7.1ch) or Stereo Digital Audio
TRANSMITTER RANGE : Full HD (1080p) up to 100m
** distance are measured base on ABtUS CAT-5e UTP cable
ESD PROTECTION : [1] Human body model ±15kV [air-gap discharge] &
±15kV [contact discharge]
[2] Core chipset ±8kV
PCB STACK-UP : 6-layer board impedance control - differential 100ohm; single 50ohm
POWER SUPPLY : 5V DC 1.5A
OPERATION TEMPURATURE : 0~40°C [32~104°F]  
STORAGE TEMPURATURE : -20~60°C [-4~140°F]  
RELATIVE HUMIDITY : 20~90% RH [no condensation]  
HOUSING : Metal Enclose
WEIGHT : 112 × 70 × 30 mm 112 × 70 × 30 mm
WEIGHT : 240g 240g